News

News / article

Technology

← Back to news Back to homepage

2026. 10. 17.

CMF Speakers Support 3D-Printed Knobs and Panels

1 min read

Nothing’s CMF Speaker S and M support custom 3D-printed replacement panels and knobs.

What is new?

The Speaker S and Speaker M allow owners to customize front panels and controls. The manufacturer has published STL models, enabling users to create their own variations and potentially replace damaged parts without replacing the entire speaker.

3DPS perspective

Real-world suitability should be evaluated against production, cost and reliability data as these become available.

Source: Original report and cover-image reference.

2026. 10. 18.

HEATER CONTROL: from temperature monitoring to visually programmable heating control

HEATER CONTROL began with two temperature sensors and a local display. Its development now includes a browser interface and a checked communication link, with configurable hardware assignment and a block-based rule editor forming the next steps.

2026. 10. 16.

ESA Returns the First Metal 3D-Printed Thrusters Made on the ISS

The European Space Agency has brought its fifth metal-printing sample from the International Space Station back to Earth. For the first time, the returned set includes small thrusters intended for satellite propulsion.

2026. 10. 16.

Musk Has Lost His Marbles… And Now They've Taken Flight!

Elon Musk’s new Roadster drove upside down, briefly took flight and demonstrated extraordinary acceleration. Engineering brilliance—or a boss’s joke turned into an assignment?

2026. 10. 14.

Bambu Lab Patent Application Describes a New Heated-Bed Design

Shenzhen Tuozhu Technology, Bambu Lab's parent company, has described a heated-bed design in a U.S. patent application intended to improve heat distribution across the build plate.

Earlier news

90 earlier article(s)

HeyGears G1X Kickstarter Passes $15 Million, Combining Full-Color 3D and UV Printing

2026. 09. 11.

Technology

HeyGears G1X Kickstarter Passes $15 Million, Combining Full-Color 3D and UV Printing

The HeyGears G1X Series has passed $15 million on Kickstarter. The Chinese platform aims to combine full-color 3D printing, textured UV work and conventional UV printing in a desktop system.

Read

CXMT RAM: China Closes the Memory Gap from DDR5 to LPDDR6

2026. 09. 10.

Technology

CXMT RAM: China Closes the Memory Gap from DDR5 to LPDDR6

China’s ChangXin Memory Technologies (CXMT) is becoming a serious DRAM competitor: its DDR5 memory is appearing in desktop and server systems, while in September 2026 the company also announced mass production of LPDDR6.

Read

SUNLU Moves Toward an IPO as China’s Filament Market Expands Rapidly

2026. 09. 10.

New materials

SUNLU Moves Toward an IPO as China’s Filament Market Expands Rapidly

Chinese materials manufacturer SUNLU more than doubled its first-half revenue year on year in 2026 while progressing toward a listing on Shenzhen’s ChiNext market.

Read

Beyond the Machines in Shenzhen: 3D Printing Moves Toward AI, Footwear and Consumer Electronics

2026. 09. 10.

Software / AI

Beyond the Machines in Shenzhen: 3D Printing Moves Toward AI, Footwear and Consumer Electronics

One of the most important takeaways from Formnext Asia Shenzhen 2026 was that additive manufacturing is spreading into industries that previously paid it far less attention – from AI-based 3D modelling and data-centre cooling to consumer electronics.

Read

Formnext Asia Shenzhen 2026 Breaks Attendance Records as Asia’s 3D Printing Market Accelerates

2026. 09. 10.

Software / AI

Formnext Asia Shenzhen 2026 Breaks Attendance Records as Asia’s 3D Printing Market Accelerates

Formnext Asia Shenzhen 2026 welcomed 34,202 visitors while international attendance jumped 157 percent. The figures underline how quickly China and the wider Asian region are becoming one of the key centres of additive manufacturing.

Read

3devo Filament Maker X10 Targets Up to 1.5 kg of Custom Filament per Hour

2026. 09. 09.

New materials

3devo Filament Maker X10 Targets Up to 1.5 kg of Custom Filament per Hour

Dutch manufacturer 3devo has introduced the Filament Maker X10, targeting the gap between laboratory development and small-scale filament production. The company says the system can produce up to 1.5 kg of filament per hour.

Read

2026. 08. 24.

Technology

KPI features have been added.

KPI features have been added. CALIBRA – Measurem Why do KPIs matter in measurement equipment management? Because data becomes truly useful only when it helps you see where attention is needed and how performance changes over time.

Read

CALIBRA – A Free Measurement Equipment Management System Is Under Development

2026. 08. 11.

Technology

CALIBRA – A Free Measurement Equipment Management System Is Under Development

CALIBRA – A Free Measurement Equipment Management System Is Under Development A new in-house developed web application is joining the growing collection of 3DPS projects. CALIBRA is being developed as a modern, transparent and expandable measurement equipment and calibration management system. Development has progressed rapidly from the original concept to an already functioning web application, with the foundations of company management, equipment tracking, external partner management and auditing now in place.

Read

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions

2026. 08. 04.

Technology

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions Development of the Parkside Multi Charger has entered a new stage. During the latest planning phase, several controller and power-switching architectures were compared to find a solution that keeps the Basic version easy to build while leaving enough room for the more advanced Pro model.

Read

Parkside Multi Charger – New Development Milestone

2026. 08. 02.

Technology

Parkside Multi Charger – New Development Milestone

Parkside Multi Charger – New Development Milestone Development of the Parkside Multi Charger continues to make steady progress. Recent work has focused not only on hardware and software development but also on establishing the project's public identity and communication. The project currently consists of two separate development branches: Parkside Multi Charger (Normal) and Parkside Multi Charger Pro.

Read